5 Easy DIY Drink Coolers For Outdoors

Igloo 5-Gallon Heavy-Duty Beverage Cooler – Walmart.com

5 Easy DIY Drink Coolers For Outdoors

We aim to show you accurate product information. Manufacturers, suppliers and others provide what you see here, and we have not verified it.

Whether your crew is out on the jobsite or playing sports in a field, keep them hydrated and safe from the sun with the 5-gallon Beverage Cooler from Igloo. With a great capacity of five gallons, this insulated dispenser is perfect for cold drinks wherever you go. Store any beverage, from water to lemonade or just ice, and the Igloo cooler will keep it cool for when you need a refreshing drink. The spigot features a push-button that makes it easy to get yourself a drink. The pressure-fit lid prevents spills and keeps unwanted dirt or other things from getting in your beverage. The Igloo 5-gallon heavy-duty beverage cooler comes with handy side handles in order to make it portable and easy to store or easy access for to pour Gatorade over your coach's head.

• Holds ice for up to 3 days • Recessed and angled drip-resistant spigot for easy dispensing • Reinforced handles for strength and product longevity • Keeper cord affixes lid to cooler for cleanliness and loss prevention • Pressure-fit lid won't trap dirt or mold • UV inhibitors and infrared technology protect the cooler against sun damage• Seat-top lid provides sitting surface”
Brand Igloo
Assembled Product Weight 5.5 lbs
Manufacturer Part Number 42184
Assembled Product Dimensions (L x W x H) 14.50 x 13.00 x 19.50 Inches

We bought this to brine turkeys for our smoker. It is PERFECT!!! We just had an 18 lb. turkey in it with no problem. We bought the brine bags also and we put 2 bags lining the cooler so we can still use the cooler for drinks if needed. We throw in some ice and the turkey stays cold for 12-20 hours until it's time to smoke it. HIGHLY RECOMMEND. Great cooler! Thank you.

this got here really fast and its awesome cooler Heavy-Duty and everything it says it will keep ice for up to 3 days just what i been looking for for the summer time

This was exactly what we needed to host an outdoor event this winter where we served hot chocolate. It kept the cocoa boiling hot for hours (almost too hot!). I'm going to use this a lot in the summer too – our house is a gathering place for neighborhood kids and we will put this in the backyard with ice water so we don't have 15 kids getting water in our kitchen every day. 🙂

Quality as expected from Igloo! Perfect for holding drinking water that I have filtered during this PANDEMIC.

My boys wanted to set up a lemonade stand this summer and I thought this cooler would help. It keeps the drink cold and is light enough when full that my three boys can work together to get it from the house to their set up.

Customer Q&A

Get specific details about this product from customers who own it.

could you put hot cocoa in this and it would stay hot by ceOctober 25, 2014

4 Answers

1. Yes I do believe. We use it on the Golf course because we have no water lines that far away from the club house. They sit in a rack in the sun all day and keep the water ice cold and fresh.

2. It does not come with the cup holder, but it has the mount on the side should you want to purchase it. For us, it wasn't a deal-breaker, because the price for this cooler is so great!

3. We used this one for Hot cider for our wedding shower, we put hot (not boiling) cider in at 11am, by 5pm it was still quite warm (not hot to burn but pleasantly warm. the temp was in the mid 60's.

4 Answers

Does this keep drinks hot also? by bfeuwiaOctober 11, 2016

2 Answers

1. Yes. I bought two for a food kitchen for the homeless, and one is being used for hot soup, cocoa, etc.

2. I would say NO this is a COOLER not a HOt/Cold item!

2 Answers

Does this cooler come with a cup holder? by MasonMarch 3, 2020

1 Answer

1. No, it does not come with a cup holder.

1 Answer

Warranty plan

Pricing policy


Walmart Protection Plans

Most items come with a limited manufacturer’s warranty. The addition of a Walmart Protection Plan adds extra protection from the date of purchase. Walmart Protection Plans cover the total cost of repair, or replacement, for products, as well as covering delivery charges for the exchange.

Walmart Protection Plan options and pricing can be found on the product page, as well as in your cart. Go towww.walmart.com/protectionto see all the coverage offered for each product. You can view your Walmart Protection Plan after your purchase in the Walmart Protection Plan Hub.

Product warranty:Warranty Information:Igloo Products Corp. warrants its products to be free from defects in material or workmanship under normal use and service from the date of original purchase for the period listed on igloocoolers.com/pages/warranty-service.

 Igloo may repair the product free of charge or provide you with a replacement product if the product proves defective under the terms of this warranty. The warranty is valid for the original retail purchaser and is not transferable. Dealers, service centers, or retail stores do not have the right to change the terms and conditions of the warranty.

Igloo is not responsible for incidental or consequential damage resulting from any malfunction.

Already purchased your product? A Walmart Protection Plan can be added within 30 days of purchase.Click here to add a Plan.

webapp branch

Source: https://www.walmart.com/ip/Igloo-5-Gallon-Heavy-Duty-Beverage-Cooler/35520771

Project Plan: Outdoor Cooler Cart

5 Easy DIY Drink Coolers For Outdoors

We partnered with Gorilla Glue to design and build this cooler cart project that uses many of their latest products.

This cooler cart will keep your drinks icy cold and serves as a perfect serving station on your deck or patio.

This deck cooler cart project is made with dimension lumber, so all you have to do is cut the boards to length and follow our simple assembly instructions. This is a woodworking project that even a beginner can build.

The cooler cart features an insulated cooler box that is lined with aluminum, so it can get wet and is easy to clean. The interior of the cooler is sealed, so that it will not leak. It also has a drain that makes it easy to empty when the ice has melted. Click here to download the complete project plans, including a material list and how to photos.

How to Build this Backyard Cooler Cart

Make the Legs and Side Panels

1. Cut the eight long and short leg pieces to length. See Material List on next page.

2. Apply a bead of glue to one long edge of each end leg, and then clamp each leg to a mating front or back leg. Drive 1-1/2″ finish nails through the front or back legs to secure the joint.

3. Cut the front, back and end panel boards to length. Apply a bead of glue to each edge and clamp the boards that make each panel (photo 1).

4. Position the tops of the panels flush with the top of the legs and attach the panels to the legs with 1-1/4″ exterior-rated screws. Predrill 1/8″ pilot holes to prevent splitting the boards near the edges or ends. We chose to use finish washers to add a decorative element, but you could also countersink each screw (photo 2).

5. Cut the bottom supports to length and attach them5. Cut the bottom supports to length and attach them to the bottom of the panels with 2″ screws.

6. Cut the axle support blocks to length and attach them to the inside face of the front and back short legs. These blocks are flush with the bottoms of the legs.

7. Bore a 5/8″-dia. hole through the front and back legs and axle support blocks. The center of these holes is located 1-1/2″ up from the bottom of the leg.

8. Cut the axle to length with a hack saw.

9. Insert the axle through the axle holes. Place one flat washer over each end of the axle. Place the one wheel on each end of the axle. Then secure each wheel with a 1/2″ push nut. Use a hammer to pat the push nut on the axle.

Insulate the Cooler Box

Note: The foam insulation and sheet aluminum measurements that are listed on the Material List are using 7/8″-thick cedar boards. If the thickness of the lumber you are using is different, then you must measure and cut the insulation and aluminum pieces to fit your cooler box dimensions.

1. Cut the rigid foam insulation pieces to size with a retractable blade knife and straightedge.

2. Cut the sheet aluminum using a circular saw. The safest and easiest way to make these cuts is to sandwich the aluminum sheets between two pieces of plywood. Use a standard universal-use circular saw blade to make the cuts (photo 3).

3. Evenly space the bottom slats on the bottom sup-ports. Secure each slat with a couple of 1-1/4″ screws.

4. Place the bottom piece of insulation on top of the slats. Then apply construction adhesive to the back of the bottom aluminum sheet. This piece of aluminum is not cut to cover the entire piece of insulation because the front, back and end insulation will cover its edges. Center the bottom aluminum sheet on top of the bottom insulation and press to ensure complete contact (photo 4).

5. Install the front and back insulation against the front and back panels. Similar to the bottom aluminum sheet, the front and back sheets of aluminum were not cut to cover the entire piece of insulation because the edges will be covered by the end insulation pieces.

Apply construction adhesive to the back of the aluminum sheets; center them over the insulation and press into place.the edges will be covered by the end insulation pieces.

Apply construction adhesive to the back of the aluminum sheets; center them over the insulation and press into place.

6. Install the end insulation pieces and attach the end aluminum sheets. These two pieces must be cut to fit exactly between the front and back of the cooler box.

7. The drain spout is made from three common plumb-ing fittings; a 1/2″ galvanized coupling, a 1/2″-dia. x 3-1/2″-long galvanized threaded nipple, and a1/2″ sillcock valve. You must bore a 7/8″-dia. hole through the side of the cooler box to install this drain spout.

Drill a small (1/8- to 1/4″ diameter) starter hole through the aluminum sheet on the wheel end of the cooler box. Locate this hole approximately 3/4″ up from the bottom of the cooler box. Next, drill a 7/8″ hole through the aluminum sheet, foam insulation and end panel.

Drill carefully through the aluminum to minimize tearing the sheet. Wrap both ends of the threaded nipple with Teflon™ plumber’s tape. Thread the coupling on one end of the nipple. Then slide the nipple through the hole in the cooler box.

On the outside of the box, thread the valve onto the other end of the nipple (photo 5).

8. Seal the interior of the cooler by applying a heavy bead of clear silicone sealant over all interior corner seams and around the drain coupling (photo 6).

Make the Top Cap and Handle

1. Cut the top cap parts to length. The top cap should overlap the inside edge of the cooler box by 1/4″ on all sides.

2. Attach the top caps to the front, back and end panels with 2″ screws. Be careful to center the screws on the edges of the front, back and end panels.

3. Cut the handles to length.

4. Bore 7/8″-dia. x 3/8″-deep holes in the handle sup-ports that will capture the handle. Use a 7/8″ Forstner bit to bore these holes.

5. Soften the sharp corners of the handle supports by mitering the corners of the handle end of the handle supports.

6. Fit the ends of the handle in the 7/8″ hole in each handle support to capture the handle. Then attach the handle supports to the front and back panels with 2″ screws.

Make the Lid

1. Cut the lid boards to length.

2. Apply a bead of glue to each edge and clamp the boards to make the lid panel.

3. Cut the lid bracing parts to length. These boards will reinforce the lid and frame the lid insulation.

4. Center the lid bracing on the underside of the lid panel and attach the lid bracing with 1-1/4″ screws.

5. Cut the piece of 3/4″-thick rigid insulation to size for the lid.

6. Cut the lid aluminum to size.

7. Secure the lid insulation and aluminum sheet to the underside of the lid with construction adhesive.

8. Cut the piano hinge to a length of 20-1/2″ long with a hacksaw. When marking the hinge, measure out from the center of the hinge to create symmetrical ends.

9. Center the lid over the cooler box opening and attach the hinge to the lid and back top cap with the screws that are provided with the hinge.

10. Attach the handle.


You may apply any exterior-rated finish that you prefer. We chose to leave our project unfinished so that it will gray to a weathered patina over time.


Source: https://www.woodworkersjournal.com/project-plan-outdoor-cooler-cart/

20 Innovative Outdoor Cooler Ideas Keeping Your Beverages Refreshingly Chilled

5 Easy DIY Drink Coolers For Outdoors

  • Tweet

Can spending time on the patio in the summers, or simply planning an outdoor party with friends be complete without a few amazing chilled drinks adding a dash of freshness to the moment? What you need to keep your beverages cool and cherishing is an outdoor drink cooler. So, let’s get going to build one with your own personalized touch with these 20 Innovative Outdoor Cooler Ideas.

Boasting two different-sized compartments, this DIY cooler is a matter of adorning an old fridge with wooden pallets to bring out a rustic essence. Decide which compartment to use, depending on the size of your gathering!

DIY Details : diyprojects.ideas2live4

2. Outdoor Cooler From Scratch

Constructing an outdoor cooler from the very scratch is definitely a great idea if you have got good woodworking skills. This thing of beauty by with its sliding lid and appropriate storage is simply awe-inspiring.

DIY Details : pin.it

3. Patio Cooler Stand

The credit to this compact structure and great functionality goes to a 48 quart bar beverage cooler by Igloo, having its top mounted within the lid of the cedar decking patio cooler stand. You’ve also got a bottle opener and cap catcher!

DIY Details : lumberjocks

4. Vintage Chair Drink Stand

Splendorous creativity is another name for a drink stand built a vintage broken chair. An ice-loaded galvanized bucket with rope handles goes into the seat hole, while a chalkboard sign makes it even cuter.

DIY Details : ohmy-creative

5. Flower Box Turned Cooler

Bring to life a backyard cooler that ditches the idea of stuffing a flower box with colorful plants, and goes for loads of ice and beverage bottles instead. A totally stylish and chic way to serve the party.

DIY Details : thetreschic

6. Wine Barrel of Fun

A reclaimed wine barrel ice chest housing drinks is going to be the perfect handy addition to your patio. Work out a hinged door on the top and use a sawhorse as the barrel stand, and voila!

DIY Details : bobvila

7. Wood Cooler Construction Plan

An ice chest, a mini counter and storage drawers – this DIY cooler has got you covered. Get your hands on the easy-to-follow woodworking plans for constructing the wooden cooler box with repurposed pallets.

DIY Details : loving21bbt

8. Build A Rustic Cooler Box

Are store-bought outdoor coolers with super vibrant color schemes don’t seem to gel up with your patio decor? Comes to rescue, this handmade pallet cooler box with a worn out rustic appeal taking the cake.

DIY Details : diyjoy

9. Build A Wood Deck Cooler

That chalkboard on the inside of the lid rightly complements the minimalist rustic structure of the wood deck cooler box built with boards and a plastic cooler. It’s coated in dark stains with a dash of red paint.

DIY Details : foxhollowcottage

10. Picnic Table Cooler

Remove the middle slats of a picnic table, installing a rain gutter section in the cavity, and it’s all set to stuff with ice and drinks. The benches on the side keep the beverages within a super easy reach.

DIY Details : pin.it

Source: https://cutediyprojects.com/outdoor-ideas/best-outdoor-cooler-ideas/

How to Build a DIY Patio Cooler Cart

5 Easy DIY Drink Coolers For Outdoors

  1. Build the cooler base
  2. Make grill storage bay and shelf
  3. Build the patio cooler lid
  4. Install cooler drain and lower shelf
  5. Finish and add hardware

I built the cooler box and grilling station entirely 1×4 cedar.

 My local lumber supplier had 12′ boards that were rough on one side and I was able to get them for half the price of what you would pay at the big box store for the cedar 1x4s.  If this is an option for you then you can save some significant money going this route.

Build Frame and Legs

You’ll start by building the top frame the size of your cooler.  The top of my cooler was 23-3/4″ x 13-1/2″.  If your cooler is a different size then you’ll need to adjust the top frame accordingly and see if you need to adjust the base as well.

First cut 2 boards to 50″ for the long top frame pieces and 3 boards to 13-1/2″ for the short top frame pieces.  Drill pocket holes in the ends of the short pieces and assembly with 1-1/4″ pocket screws.  This will give a 15-3/4″ opening for the grilling storage box.

Next cut 8 boards down to 38-1/4″ long for the legs.  Rip down 4 of these boards to narrow leg pieces at 2-3/4″ wide.  Use a pocket hole jig to drill pocket holes in the 2-3/4″ pieces in the top 13″ of the leg and another hole 2″ up from the bottom.

Join the narrow leg pieces to the wide pieces glue and  1-1/4″ pocket hole screws on the top and bottom.  In the gap where there are no pocket holes, use clamps to hold the joints tight.  Make two legs with the narrow pieces on the right side and two with the narrow pieces on the left side.  This lets you have the wide face of the legs showing on the front and back of the patio cooler cart.

Finally, cut 8 pieces of side cladding to 16-1/2″ long.  Use a trim router to route a 1/16″ 45 degree chamfer on the outer edges of each board.  This will give the boards a nice beadboard look when butted together.

Connect Legs with Side Boards

Lay two legs down and starting from the top, attach 4 side cladding pieces to the legs with two 1-1/4″ screws on each side of each board. Repeat this process with the other 2 legs to form 2 side assemblies.

After that, cut 4 pieces of front cladding and 4 pieces of back cladding to 44-1/2″ long, and route a chamfer on the long edges just the side cladding.  Side the side assemblies on edge and starting at the top, attach the front cladding to the sides with 1-1/4″ screws.

Next flip the assembly over and now attach the 4 back cladding pieces to the sides.  Now you have the base of your patio cooler and grill cart combo!

Then cut two 3/4″ x 3/4″ top front cleats 14″ long and one top side cleat 11″ long.  Predrill holes on the bottom for attaching the top frame later.  Secure the 11″ cleat to the middle of the right side flush with the top and secure the 14″ cleats to the front and the back 1-1/2″ away from the right side.

2. Make the Grill Cart Storage Bay and Bottom Shelf

Attach two 1″ wide 14″ long cleats to the inside of the front and back walls, 18″ from the right side.  Cut four 15″ wide storage divider boards and glue and screw them to the cleats to create the storage bay on the DIY cooler box.

Cut and install two 17-1/4″ cleats to the front and back of the storage bay.  Put them 3/4″ up from the bottom of the bay then attach five 15″ storage bay bottom pieces to the cleats with screws from underneath.  The middle board will need to be trimmed to fit since it’s smaller than the others.

Now attach the top frame to the base with pocket hole screws on the cooler side and with 1-1/4″ screws through the cleats in the storage bay.  Use glue on all the top surfaces for a good hold.

Cut two 46″ long 1″ wide shelf stretchers and eleven 16-1/2″ shelf slats.  Attach the slats to the stretchers with glue and a brad nailer.  For consistent spacing start with the outer slats and then secure the middle slat.  From there fill in the gaps spacing the slats ~3/4″ apart.

Test fit your cooler in the opening and remove the cooler drain plug since you’ll need it later.  Then reach a marker through the cooler drain and mark a spot on the left side of the patio cooler.  Drill a 1-1/4″ hole in the side for the plumbing fittings.

Flip the grill cart combo over and put the cooler in place.  Secure the cooler by installing three 15″ cooler supports into the front and back with 1-1/4″ pocket screws.

Grill Bay Lid

Flip the DIY patio cooler back over and cut four 15-3/4″ long storage bay lid pieces.  Put a chamfer on the boards with the trim router the body cladding.  Drill a 1″ hole  in the middle of one board and chamfer the top edge of the hole.

Next cut two 13-1/2″ by 1″ wide lid battens.  Then line the lid boards up and fasten the boards together using the battens, glue and 1-1/4″ screws.

Make 4 small 1-1/2″ x 2″ storage lid tabs.  Round one corner of the tabs and install them in the top corners of the storage bay with glue and brad nails into the top corners of the storage bay.

Cooler Box Lid

Build the frame around the cooler lid your own cooler measurements.  The sides should be 3/4″ taller than your lid.  I cut two lid front/back pieces to 25-1/4″ by 2″ and two side piece 13-1/2″ by 2″.  Join the frame with 1-1/4″ pocket hole screws.

Cut 3 lid support cleats to 13-1/2″ by 1″ and attach them to the front and back with pocket holes.  Place the outer cleats so they are directly over the side ridges on your lid that mate with the cooler body.  You’ll be screwing into the lid later and don’t want the screws to pop through the underside of the lid.

Then make 5 lid top pieces 25-1/4″ boards.  Route the 45 degree chamfers on these boards just as the others.  Layout the boards on the top and cut the center piece to width to fit.  Use super glue and temporarily affix the full size boards to the edges of the frame.

Flip the lid over and permanently attach the lid boards to the cleats with 1-1/4″  screws.

Flip the lid over again on top of the cooler.  Now secure the top to the cooler lid with 1-1/4″ screws through the outer cleats into the lid.

 Attach the center board with wood glue on the center cleats and super glue on the outer edges.  The super glue will bond quickly and the wood glue will give a long lasting hold.

 Assembling the lid this way give you a super clean look with no nail or screw holes…SCORE!

4. Install the Cooler Drain & Lower Shelf

Remove the drain from your cooler and keep the washer on the inside.  Get two 1/2″ PVC male threaded adapters, a length of 1/2″ PVC, a 1/2″ nut and a hose bib for the outside of the cooler.

The length of the PVC pipe will vary per installation.  Cut a hose bib mounting block to 3-1/2″ by 3-1/2″ and drill a 1″ hole through it for the male adapter.  Glue up the final PVC parts and install them on the hose bib and mounting block.  Then install them into the cooler box and lock in place using the nut in the cooler.

Sand everything down to 150 grit and apply your finish at this point.  I used a Spar Urethane made for outdoors so it will wear well.

After the finish is dry, install the lower shelf so the bottom is 2-1/2″ up from the floor.  I would recommend turning the patio cooler on it’s top to do this vs. laying it on its back I did

Source: https://fixthisbuildthat.com/diy-patio-cooler-grill-cart-combo-plans/

Brilliant DIY Cooler Tables for the Patio (with built-in coolers, sinks, and ice boxes)

5 Easy DIY Drink Coolers For Outdoors

Entertaining can be stressful, so make it easier on yourself by knowing that your guests’ drinks will be nice and cold with one of these awesome DIY built-in cooler tables!

For an extra large party, just put together a quick wood box and add cinder blocks! via Michaela Rae

This hexagon bench by Addicted2DIY makes a great seat — and Katie suggested building a round cooler into the middle, instead of building it around a tree. Brilliant!

I haven’t tried it, but several readers have suggested that this bucket coffee table we featured could be modified to have a removable top, with storage for drinks or other things in the bottom…

Personally, I think you could keep it simple, too! Any bucket can be added to any table you can build — we spotted this one on Instagram by @rustic_customs.

Or why not add it to a large wooden spool? (original image source unknown) This is just a 5 gallon bucket, easy to switch out or dump melted ice.

I’m not sure how DIY-able it is to carve limestone this cooler table via Better Homes and Gardens — but I bet you could get a similar feel with concrete and some creativity!

Speaking of concrete… It’s a planter… or a drink cooler! This concrete number by Homemade Modern is versatile and so cool! I bet you could add a wood lid to make it a storage bench, too.

Perfect for a small party, this old chair upcycled into a drink stand by Oh My Creative is just too cute. Imagine a set of mismatched old chairs turned into drink coolers, lined up at a party!

Liz Marie’s husband build this oversized drink TROUGH to go with her awesome popcorn stand at Liz Marie Blog. So perfect for a neighborhood block party!

If you’re short on old chairs, you can also build an easy beverage station, this one at Fox Hollow Cottage — room for drinks, plus napkins or other paper goods.

No tutorial, but this wood built-in cooler table via Upcycle Art is amazing! Just look at all the storage in the dresser-style table!

Or, if you just need plenty of drinks without any particular, uh, finesse to the presentation — this stacked kiddie pool cooler is kinda cool! (original image source unknown) It could be a fun addition to a beach themed party or a child’s birthday party as well. Maybe I’ll fill one full of Diet Coke for my next blogger get-together, haha!

Couldn’t pass up that beat-up table marked “free”? Turn it into something beautiful Anita from Unique Creations by Anita.

In this post:
page 1: 11 cooler tables to build or upcycle
: 12 more built-in cooler tables you can DIY

You should also check out: 

Easy and Amazing Backyard Lighting Ideas

Build the Perfect Outdoor Oasis Pergola with Swings

Remodelaholic is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to amazon.com. Please see our full disclosure here.

Cassity started Remodelaholic with her husband, Justin, to share their love for knocking out walls together. Since then, Remodelaholic has become a great community and resource for all those wanting to know how to make their builder-grade home BEAUTIFUL on a budget!

Source: https://www.remodelaholic.com/brilliant-diy-cooler-tables-patio/2/

DIY Outdoor Side Table with Cooler (Easy + Unique)

5 Easy DIY Drink Coolers For Outdoors

This is no ordinary DIY outdoor side table. Lift the top and there’s a handy cooler for chilling summertime drinks! Perfect for your pool, deck, or patio.

How to Make an Outdoor Side Table

Are you looking to make a DIY outdoor side table? Then look no further than this square wooden patio table! It’s easy to make with a few tools and pocket hole joinery. It has a removable top that lifts to reveal a cooler area for icing down beverages. It’s an attractive handmade project that looks store-bought!

You may also enjoy these free DIY outdoor furniture plans DIY Outdoor Coffee Table and DIY Outdoor Plant Stand.

This post contains affiliate links to supplies or tools I used to complete this project. Purchases made using these links help support the Saws on Skates website and allow me to share more DIY projects. and DIY tips with you. There is no cost to you for using these links. Click here to visit my site policies.

Originally published May 9, 2015 updated May 21, 2019

I used to be a realtor. I say used to be because I gave up my real estate license.

If anything could go wrong with a real estate transaction it went wrong with the transaction I was working on. I even had a healthy client unexpectedly die during the process of buying a house!

But there was one couple who I really bonded with. They d outdoor entertaining, they d handcrafted furniture and they d craft beer.

I searched for something to build them as a housewarming gift, but I couldn’t find anything that fit their lifestyle. So, I decided to design my own project instead.

What I came up with was this outdoor side table I designed especially for them. And it’s no ordinary piece of outdoor furniture. It’s a real multitasker!

First, it’s a table. But there’s more. The table top can be removed to reveal a square planter that doubles as a cooler for chilling summertime drinks. And that’s not all. The table top can be used as a serving tray!

Before we get into how to make an outdoor side table, be sure to click the subscribe button at the bottom of this page to sign up for my FREE weekly newsletter loaded with helpful pocket hole tricks, space-saving workshop ideas, clever DIY tips and more!

How Do You Keep Drinks Cold in the Outdoor Side Table?

The cooler in this DIY outdoor side table isn’t exactly a cooler. It’s a square planter that’s typically used for patio plants flowers or herbs.

I got mine at a big box home improvement store Home Depot or Lowe’s. But I know you can also find them at discount department stores or even online.

The only thing to keep in mind is the planter needs to have a lip around the top this one. The lip holds the planter in position on the cooler cleats inside the table.

How Do You Finish the Outdoor Side Table?

I didn’t have a paint sprayer when I made this DIY outdoor side table. I used a Behr exterior stain called “Padre Brown” and I applied two coats. By hand. With a paintbrush. And it took FOREVER!

Here’s a hint. If you’re going to paint or stain this project, I recommend doing it before assembly. The spaces between the slats are tiny and you’ll go insane trying to get a brush between them.

If I were going to build this project today I would assemble it and then apply the finish with my HomeRight Super Finish Max Sprayer. It would be so much quicker to spray and it was easier to get the paint in the tiny spaces between the slats.

Source: https://sawsonskates.com/beverage-table/