DIY IKEA Hack: Painted RIBBA Picture Frame Mats

Colorful DIY Photo Gallery Wall

DIY IKEA Hack: Painted RIBBA Picture Frame Mats

  • Pinterest2346

WOW! Y'all have gone crazy (in a good way) for our colorful photo gallery wall that we added to our upstairs hallway. I never expect the response I got to it over on Instagram–thank you! And I know many of you have been patiently waiting for the tutorial. And today is the day, friends!

We hadn't made any changes to our upstairs hallway in over 6 years, so we recently gave it a makeover that you can read all about here.

The biggest impact in the hallway is the addition of this super colorful gallery wall that is highlighted by sconces. And y'all have been inundating me with questions about it.

What colors did I use? What frames? How did I hang them? 

Alllllllll of those questions are answered for you in this detailed colorful DIY photo gallery wall tutorial video I made for you! That's right friends!!!! I'm starting to focus more on creating videos and growing my channel.

If you prefer to read and see photos, no worries! The full tutorial is still written out for you below.

This post contains some affiliate links for your convenience. Click here to read my full disclosure policy.

Materials Needed:

Step 1

Unwrap your frames and remove the white mats from them. 

Step 2

Use a paintbrush (I use a 1 1/2 angled brush, but it really doesn't matter what kind of brush you use) to paint your photo mat. There's no magic technique, but do try to use long, even strokes. Unless you are really lucky, each mat will require 2 coats of paint. But don't worry. You only have to let it dry about 30 minutes in between coats.

Step 3

Whenever I was waiting on my photo mats to dry, I would head outside to spray paint my frames. I started with black frames and they were fine. But in the end, I decided I d black better.

This is the spray paint I used to paint the frames gold. When spray painting, LIGHT coats are best! They go really quickly and dry fast. I applied 4 coats to my frames, allowing them to dry about 30 minutes in between coats. If you apply too much spray paint, you will get drips, which is NOT cute.

Step 4

Repeat with all your frames and mats until they are done! I completed a total of 8 frames/mats. Once they were thoroughly dry, I popped the photos in and reassembled them. 

I chose black and white frames because I thought it would be a nice contrast against the colorful mats. I had all my 12″ x 12″ enlargements printed by Shutterfly and they turned out great (as always).

Step 5

Apply your Command picture hanging strips to the back of your frames. I to use 1 in each corner so that they remain perfectly level. The small or medium-size strips will work fine for this project. Just follow the instructions on the packages to ensure that you use the strips properly. They are EASY to use!

Step 6

Use the paper inserts from your frames and painter's tape to decide on the layout for your gallery wall. This is one of my favorite tricks!

Once you've decided on your spacing, use a laser level (or traditional level) to make sure your frames are perfectly even as you hang them. 

Step 7

If you want to add sconces above your lights I did, then keep reading! You don't have to hardwire them OR plug them in. These are the materials I used:

  • Black and gold sconces
  • Puck lights
  • Velcro

So how did I add sconces that actually light up without hardwiring them OR plugging them in?! I used the “magic light trick” that Nesting With Grace thought of! You can click below to watch her video on exactly how to do it. So smart and easy!

We are so in love with how this project turned out. It didn't cost a ton of money relative to the HUGE impact it has on the space. Here are some more photos for you.

Before you head out and get started, be sure to check out my FREE design guides that will help you help you design spaces you absolutely love! Subscribe now and you will receive a password so that you can access everything in one convenient digital library.

  • Pinterest2346