Quick Answer: What Do You Use A 13 Amp Fuse For?

How do I know what amp fuse to use?

Fuse rating = (watts/volts) x 1.25Note the power of the appliance – usually in the appliance manual,Note the voltage (240 volts in the UK).Use the next highest fuse rating after the calculation.

Say the calculated fuse rating is 2.2679 amps, use a 3 amp fuse..

Can I use a 13 amp fuse instead of a 10 amp?

If you replaced it with 13A fuse, it will allow current more than 10A, so it may possible that other components may get damage due excessive current flow than specified. If TV components can sustain up to 13 A current, you can replace it.

How can you tell if a 13a fuse is blown?

Look at the fuse wire. If there is a visible gap in the wire or a dark or metallic smear inside the glass then the fuse is blown and needs to be replaced.

Can you put a 16 amp fuse in a 13 amp plug?

Yes they will. You’ll get about 150A from a 13A supply, any more than that and the fuse will probably pop but it won’t cause any damage to the machine or the supply.

Can I replace a 5amp fuse with a 13 amp?

A 13 will be ok in a 5amp device as long as its ok and your going to get the correct ampage soon. Not a good idea at all, if there is a fault with them you risk a shock or a fire.

Can I replace a fuse with a higher amp?

Never replace a blown fuse with a higher-amp fuse. Always replace the fuse with one with the specified amp rating. You may install the next-smaller-rated fuse to get you by in a pinch until you can purchase a replacement.

Can I use a 3a fuse in a 13a plug?

If it’s a rewireable type plug and the original fuse size fitted by the manufacturer is not known, the recommended method is to use the 700W rule: For an appliance rated as 700W or less, a 3A fuse should be fitted. For appliances above 700W, a 13A fuse should be fitted.

Can I put a 10amp fuse in a 5 amp?

Possibly yes. What ever is wired into that 5 amp slot is rated for a max of 5 amps, overdrawing more than 5 amps by removing the 5 amp fuse and putting in a 10 amp fuse can possibly short out a circuit.

How much current can a 13 amp fuse take?

BS 1362 Fuse Operation Characteristics In fact a 13A fuse will allow a current of 20A to pass indefinitely without blowing.

How many watts can a 5 amp fuse handle?

1150 WattsMultiply the voltage by the amps and this will give you the maximum number of Watts you can place on the circuit. If your lighting circuit at home is protected by a typical 5 amp fuse you can multiply this by the voltage to get 1150 Watts.

Is it OK to use a higher amp fuse?

In general, NO. Replacing a fuse with a higher-amp fuse is a very bad idea and can lead to fires. Fuses (and circuit breakers) are rated such that they blow or trip before any part of the circuit gets to a dangerous current. … Fix the underlying problem, and you won’t have any more blown fuses.

What amp fuse does a fridge use?

3 amp fuseSome appliances, such as lamps, televisions, computers, fridges and freezers generally require a 3 amp fuse. However washing machines, dishwashers, microwaves, kettles, toasters and irons usually require 13 amp fuses.

What happens if I use the wrong fuse?

Fuses are present to protect the components of the electrical system. Rather than destroying the circuit when there is a surge of power, the fuse blows to protect it. … If you use a fuse with the wrong amperage, the fuse won’t blow as intended, damaging the circuit and resulting in a much larger repair bill.

Is it safe to use a 5amp fuse in a 3 amp plug?

If they are the same physical size, yes you can. But. It was designed to operate with a three amp fuse. Oversizing your fuse could lead to other issues.

Does it matter what fuse you put in a plug?

The appliance itself is fused and that is to help protect the appliance. The fuse in a mains lead just needs to be rated at less than the maximum current capacity of the cable. So if you’re using 20 amp rated cable then a 13 amp fuse protects it.

Can I use a 5a fuse in a 13a plug?

No. You must use a 5A fuse. Using A 13A fuse is a fire risk. The fuse is there to protect the adapter in case of a fault.

Can I use a 3 amp fuse instead of a 2.5 amp?

3 amp should be fine. the fuse is mainly there to protect from burning wires. you might try Radio Shack – they would have the fuse in a higher voltage rating (usually 250 volt), but that won’t cause a problem.